Facebook
Twitter
LinkedIn

Synchronous setting of double tool turrets in turning and milling centers

Since there are multiple processing procedures for the same workpiece, if the processing conditions permit, try to keep the two tool holders of the double tool post turning and milling center in working condition at the same time. This can effectively shorten the processing time and improve work efficiency.

While using computer-aided processing software to complete part programming, you can also optimize the process:

1. The allowance can be removed faster through the synchronous setting of the upper and lower tool holders. While rough turning the outer shape, the rough boring process of the inner hole is also completed.

 

2. Through the synchronous setting of the upper and lower tool holders, the processing of a series of holes is completed, which not only improves the processing efficiency, but also reduces the impact of workpiece deformation by canceling out the drilling axial forces.

 

3. Through the synchronous setting of the upper and lower tool holders, the processing of two sections of shapes can be completed at one time. Equipment with double turrets has a dual-channel control system. The upper and lower tool turrets can be controlled independently. Synchronous processing can be achieved through synchronization statements in the code. For example, in the following code, M10 and M15 are synchronization statements. The syntax requirements of the synchronization statements are formulated according to the requirements of the control machine, and the number of synchronization statements is determined according to the synchronization processing content. The content between synchronization statements is the content of synchronization processing.

Request For Quote

small_c_popup.png

Let's have a chat

Leave your information, our sales will contact you as soon as possible!