Facebook
Twitter
LinkedIn

Safety operating procedures for CNC lathes and turning centers

CNC lathes and turning machining centers are mainly used to process rotary parts, and their safety operation procedures are as follows:

1. Before work, you must wear the prescribed labor protection equipment, and it is strictly forbidden to drink alcohol; At work, we should concentrate on the work, operate carefully, and strictly abide by the safety operation procedures.

2. Before starting the machine tool, read the instruction manual of the machine tool in detail, and do not move the machine tool at will before being familiar with the operation of the machine tool. For your safety, please read the instruction manual of the machine carefully before starting the machine, and pay attention to the following:

(1) Shift handover record

The operator first looks at the handover record before working every day, and then checks whether there is any abnormal phenomenon, observes whether the oil in the automatic lubricating oil tank of the machine tool is sufficient, and then manually operates and adds oil several times.

(2) Power supply:

1) When connecting to the power supply, the main power supply of the machine tool should be turned on first, and then the CNC power supply should be turned on; However, when the power is cut off, the operation is done in reverse order.

2) If there is a failure in the power supply, the main power supply should be cut off immediately.

3) Before sending power and pressing the button, pay attention to whether there are people around the machine tool to repair the machine tool or electrical equipment to prevent accidental injury to others.

4) After the work is finished, the main power supply should be cut off.

(3) Inspection

1) Before the machine is put into operation, it should check whether all the control functions are normal according to the operation steps described in the operation manual, and if there is a problem, it will be eliminated before working.

2) Check whether the pressure value indicated by all pressure gauges is normal.

(3) Emergency stop

In case of emergency, the stop button should be pressed immediately.

3. General safety operation procedures for CNC lathes and turning machining centers

(1) Before operating the machine tool, be sure to wear labor protection equipment, do not wear gloves to operate the machine tool.

(2) Before operation, you must be familiar with the function of each button and the precautions for operation.

(3) When using the machine tool, you should pay attention to the content of the warning on the warning signs of each part of the machine tool.

(4) The tools around the machine tool should be placed neatly and easily handled.

(5) The protective door of the machine tool must be closed before processing.

(6) After the tool clamping is completed, the test cutting should be carried out in a manual way.

(7) During the operation of the machine tool, do not remove the chips, and avoid touching the moving parts of the machine tool with your hands.

(8) When removing chips, use certain tools, and be careful not to be scratched by chips.

(9) When you want to measure the workpiece, it must be done in the machine tool stop state.

(10) After the work is completed, attention should be paid to keeping the machine tool and control equipment clean, and the machine tool should be maintained in time.

4. Special precautions during operation:

(1) When the machine tool is energized, the operator must not open and touch the part of the machine tool with lightning symbol and strong current device to prevent being injured by electric shock.

(2) When maintaining the electrical installation, the power supply must be cut off first.

(3) During the operation of the machine tool spindle, be sure to close the protective door of the machine tool, and be sure to pay attention to the safety of your hands when closing the door to avoid injury.

 

Request For Quote

small_c_popup.png

Let's have a chat

Leave your information, our sales will contact you as soon as possible!