Facebook
Twitter
LinkedIn

Machine shutdown steps

Machine shutdown steps:

(1) Check that the light inside the CYCLE SRART button should be off.

(2) If there is an external device, turn off the power of the external device first.

(3) Press the emergency stop button on the operation panel.

(4) Press the CNC POWER OFF button on the operation panel, then the CNC power off.

(5) Turn off the main power (pull down the air switch)

(6) Lock the start control switch of the main power supply. Note: This machine has the function of opening the door and powering off: the lower part of the electrical box of the machine tool is installed with a door opening and power-off protection switch, under normal working conditions, open the electrical box door, the main power switch will automatically trip, and the main power switch cannot be closed if the door is not closed. If you need to open the door to turn on the main power supply, you must first pull out the switch handle outward, and then close the main power switch.

Request For Quote

small_c_popup.png

Let's have a chat

Leave your information, our sales will contact you as soon as possible!