CNC wire cutting machine tool safety operating procedures

1. Basic precautions for safe operation


l. Please wear work clothes, safety shoes, work cap and protective glasses when working. Note: Wearing gloves to operate machine tools is not allowed;


2. Move or damage the warning sign installed on the machine tool;


3. Be careful not to place obstacles around the machine tool, and the working space should be large enough;


4. If a certain task requires two or more people to complete it together, attention should be paid to coordination between them;


5. Compressed air is not allowed to be used to clean machine tools, electrical cabinets and NC units.

2. Preparation before work


1. The machine tool must be preheated before starting work, and carefully check whether the lubrication system is working properly. If the machine tool has not been operated for a long time, oil lubrication can be supplied to each part manually;


2. Carefully check whether the silk transport mechanism and working fluid system are normal, and handle any abnormalities in a timely manner;


3. Check whether the high-frequency power supply is working normally and adjust relevant parameters;


4. Check whether the workpiece is clamped tightly and maintain good contact between the workpiece and the high-frequency power plate.

3. Safety precautions during work


l. It is forbidden to touch the silk transport mechanism with hands;


2. It is forbidden to touch the workpiece being processed with your hands;


3. When the machine tool is in operation, the operator is not allowed to leave the post.

4. Things to note after the work is completed


1. Remove chips, wipe the machine tool, and keep the machine tool and the environment clean.


2. Check the status of lubricating oil and coolant, and add or replace them in time;


3. Turn off the power supply and main power supply on the machine tool operation panel in sequence.

Request For Quote


Let's have a chat

Leave your information, our sales will contact you as soon as possible!