Facebook
Twitter
LinkedIn

CNC lathe operation procedures

1. The operator must be familiar with the instruction manual of the machine tool and the general performance and structure of the machine tool, and it is strictly forbidden to use it with super performance.

2. Before starting the machine, check whether all parts of the machine tool are complete and normal, and whether the safety protection device of the machine tool is reliable according to the provisions of the equipment inspection card.

3. Refuel according to the provisions of the lubrication chart, check whether the oil standard, oil quantity, oil quality and oil circuit are normal, keep the lubrication system clean, and the oil tank and oil hole shall not be open.

4. The operator must operate the machine tool in strict accordance with the operation steps of the CNC lathe, and other personnel shall not start it without the consent of the operator.

5. When pressing each key, the force should be moderate, and the keyboard, keys and display screen should not be slapped hard.

6. It is strictly forbidden to knock on the center frame, the center, the knife holder, and the guide rail.

7. When the machine tool fails or is abnormal, it should be stopped immediately for inspection and elimination.

8. When the operator leaves the machine tool, changes the speed, changes the tool, measures the size, and adjusts the workpiece, it should be stopped.

9. After the work is completed, all parts of the machine tool should be in their original state, and the power supply should be cut off.

10. Keep the machine tool accessories properly and keep the machine tool clean and intact.

11. Do a good job of cleaning the machine tool, keep it clean, conscientiously implement the handover procedures, and fill in the handover record.

Request For Quote

small_c_popup.png

Let's have a chat

Leave your information, our sales will contact you as soon as possible!